Zennio Z41 Instrukcja Obsługi Pobierz pdf (Strona 21)

ZENNiO AVANCE Y TECNOLOGÍA _vwww.zennio.com

Figure 3.12: Text indicator

The boxes configured as a ‘text indicator’ can be of several types: Binary, Integer (1 byte),

Percentage, Enumeration, Integer (2 bytes) and Float.

Binary: The 1-bit communication object "[Home x - Box y] Binary Indicator" is enabled,

and depending on the value received, "0" or "1", the text configured for the value "0" (Off

Text) or for the value "1" (On Text) will be displayed.

Integer (1 byte): The 1-byte communication object "[Home x - Box y] 1 byte Indicator" is

enabled and the state of this object, 0…255, will be displayed. After downloading parameters

or a ‘reset device’ command the value displayed will be 0, until the object is updated.

Percentage: The 1-byte communication object "[Home x - Box y] Scaling Indicator" is

enabled and the state of this object, 0…255, will be converted to a percentage within the

range 0…100 and displayed with a trailing ‘%’ symbol. After downloading parameters or a

‘reset device’ command the value displayed will be 0%, until the object is updated.

Enumeration: This option allows associating numerical values with texts. When

selecting it, the 1-byte object "[Home x - Box y] 1 byte Indicator" is enabled, and the following

options are shown:

 # Enums: Depending on the chosen number, up to 6 value-text pair boxes will be

shown.

 Value z: A value between 0 and 255 that if received by the object "[Home x - Box y]

1 byte Indicator" will cause the text specified in “Text z” to be displayed.

 Text z: The text that will be displayed in the box when the object "[Home x - Box y] 1

byte Indicator" receives the value specified in "Value z".

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 52 53

Brak uwag

Zennio Z41 Instrukcja Obsługi Strona 21